Novotechnik Messwertaufnehmer OHG: Plasma Treatment of Sensor Circuit Boards
Complete throttle valve with flap, integrated actuator and sensor. The microfine cleaning and activation by Openair® Plasma is carried out on the internal printed circuit board.
Novotechnik Messwertaufnehmer OHG, based in Germany, is a leading manufacturer of qualitatively high-grade potentiometric position transducers and rotary sensors. These sensors are predominantly used in automotive and mechanical engineering processes. Since the end of 2000 Novotechnik has employed Openair® plasma under cleanroom conditions in their production line for activating printed circuit boards before coating. Since the introduction of the Plasmatreat technology, this sensor manufacturer has produced and supplied a total of activated individual components in excess of 50 million and, according to the company, not a single problem has occurred with the adhesion of the coating.
The circuit boards are printed with electrically conductive ink in a screen printing process. Activation with plasma is a prerequisite to ensure safe wetting of the substrate with the conductive ink as well as to achieve good adhesion of the ink to the substrate.For a long time, Novotechnik had executed their pretreatments using low pressure plasma in a vacuum chamber. This method was effective but not suited for the pretreatment of large quantities. The process times used to be too long, and integration into the existing screen printing production lines was not possible. Adding to this was the labor-intensive operation for equipping the vacuum chamber. The Openair®-process put an end to all these limitations.
The rotary nozzle used in this application takes at most one second for the activation of one circuit board panel. At Novotechnik, the installation is adequately sized to handle several screen printing lines simultaneously. Another positive and important effect aside from the activation: The Openair® plasma flowing onto the surface at almost ultrasonic speed also removes particles adhering to the surface and neutralizes the electrostatic charge of the circuit board after unpacking.
Openair® plasma offers the user the following values:
- Elimination of any and all adhesion problems
- Integration of the plasma installation into the continuous production process
- Higher productivity: Tripling of the throughput
- Distinct reduction in operating costs
Novotechnik Messwertaufnehmer OHG
Plasmatreat North America Inc.
1480 Sandhill Dr., Unit 8,
Ancaster, ON L9G 4V5
Phone: +1 905 304-5200
Fax: +1 905 304-5260
Contact: Mr. Tim Smith
Plasmatreat USA, Inc
2541 Technology Drive, Suite 407
Elgin, IL 60124
Phone: +1 847-783-0622
Fax: +1 847-783-0991
Contact: Mr. Jeff Leighty
Plasmatreat USA, Inc
4th State, Inc.
1260 Elmer Street
Belmont, CA 94002
Phone: +1 650 596 1606
Fax: +1 650 596 1180
Contact: Mr. Wally Hansen