HELLA
Car headlights: Quality assurance with Openair® plasma

In car headlight production, adhesive bonding of the polycarbonate lenses with their polypropylene housings must satisfy highest demands on sealing. Even the tiniest leaks would lead to penetration of humidity and consequently to impairment of the headlight lens with the result that the light radiation angle would in turn be negatively affected.
HELLA Australia, a fully owned subsidiary of Hella KGaA Hueck & Co, Germany, was started 50 years ago as the first operating overseas Hella plant. Here the grooves of the PP housings are cleaned and activated with Openair® plasma through rotary jets before applying a 2K-silicone adhesive. During this operation, the surface energy of the PP rises from 35Jm/m² to over 72mJ/m². The thereby increased adhesion properties of the subsequent bonded joint provide for its full sealing. The rotating feature of the plasma jets of type RD1004 ensures that not only the bottom of the PP groove but also its side walls are activated at the same time. This process, which is patented worldwide by Plasmatreat, has a particularly gentle effect on the material to be treated since it distributes the plasma, in a scattering manner, in a circular path rather than providing for a high pointwise energy input.
Apart from that, David Byrne, Chief Assembly Engineer at HELLA Australia Pty Ltd, especially appreciates the high degree of process safety and reproducibility offered by the Plasmatreat generator FG5002S: "The generator is equipped with a PLC controller with touch screen for a precise display of operating and error messages. What is of paramount importance to us is the signal linkage with the lower- and higher-level control systems." All monitoring functions and their readings such as current, voltage, frequency, number of revolutions, plasma intensity, fiber optic detection and others can be transferred via the addition of the fieldbus interface to HELLA's own higher-level cell control system.
David Byrne: "The high degree of plasma activation and the accuracy of the monitoring functions and fault diagnostics assure us the provision of a high-quality product."

Benefits

Openair® plasma offers the user the following benefits:

  • Activation of even complex geometries
  • High adhesion properties when bonding PP with PC
  • Gentle pretreatment through the use of rotary jets
  • Extraordinarily high degree of process safety and process reproducibility
  • Distinct quality increase in production


Hella Australia Pty Ltd
www.hella.com.au

Put atmospheric plasma to the test in your production.
Become development partner of Plasmatreat!

Canada
Plasmatreat North America Inc.
1480 Sandhill Dr., Unit 8,
Ancaster, ON L9G 4V5
Canada

Phone: +1 905 304-5200
Fax: +1 905 304-5260

Contact: Mr. Tim Smith
tim.smith@plasmatreat.com


USA
Plasmatreat USA, Inc
2541 Technology Drive, Suite 407
Elgin, IL 60124

Phone: +1 847-783-0622
Fax: +1 847-783-0991

Contact: Mr. Jeff Leighty
jeff.leighty@plasmatreat.com


Plasmatreat USA, Inc
4th State, Inc.
1260 Elmer Street
Belmont, CA 94002

Phone: +1 650 596 1606
Fax: +1 650 596 1180

Contact: Mr. Wally Hansen
wally.hansen@plasmatreat.com

 
 
Micronora 2016
International microtechnology and precision trade fair

September 27 – 30, 2016
Micropolis / Parc des Expositions
Besancon Cedex, France

Material World Osaka 2016
Highly-functional Material World, Osaka 2016

October 5 – 7, 2016
Hall 6, Booth A-S-488
Intex Osaka, Japan

Language